Why is the RAMCHECK Communication program not transmitting the firmware to RAMCHECK? Why am I getting Communication Error Code 0?
A. RAMCHECK’s COM settings may be incorrect. From the RAMCHECK menu, select Setup Software. Choose the tab that says “Setup Serial Com”. Click the Set Port Off button then change the Baud Rate to 38,400, afterwards, click the Set Port On button. • Q. Should the serial port on RAMCHECK remain permanently connected to a PC? A. NO. RAMCHECK is made to be a portable device. The serial port is present to provide FLASH EPROM upgrades and to provide an interface for the Communications program, however, if you intend to leave your tester next to your computer, you may feel free to leave the serial port connected.
Related Questions
- I received the error "Cannot start main setup program! (Create Process() returned error code 0x000000C1H)" when installing Collection Master, what do I do?
- I received the error "Cannot start main setup program! (Create Process() returned error code 0x000000C1H)" when installing Collection Master, what do I do?
- Why is the RAMCHECK Communication program not transmitting the firmware to RAMCHECK? Why am I getting Communication Error Code 0?
- When tyring to use the RS232C communication we receive error code Err11.What needs to be done to avoid this ?
- When tyring to use the RS232C communication we receive error code Err11.What needs to be done to avoid this ?
- Why is the PC COMMUNICATION Software not transmitting the firmware to my SIMCHECK II?
