Why is the filter unevenly cut?
The end-user may have mis-alignment when one side of a filter disc is completely cut while a section of the filter disc is not, or, one area of the plate is completely cut but the remaining section of the plate is not. An asymmetrical pattern indicates that part of the disc-cutting surface is too low and it should be re-aligned. To re-align, place a very thin (0.5mm) spacer, on the side that is cutting completely, between the cutting plate and the processing head. Completely close the harvester, then open. This step should re-align the head, so check for evenness of the cut. If this does not solve the problem, call Inotech at (800) 635-4070.
