How does Waterguard purify water?
Waterguard takes care of all three types of impurities present in water. At the time of filling the top container, water passes through a pre-filter pad of 5 micron rating. Suspended particles get trapped in the pre-filter pad. Then, the filtered water flows through iodinated resin beads for disinfection. It carries an optimum dose of iodine and gets collected in carbon cartridge holder reservoir, where it flows on first come, first out basis. The disinfected water then passes through granular activated carbon & ion exchanger mixed bed where the residual iodine chlorine, organic impurities like pesticides (Aldicarb, Lindane etc.), herbicides Trihalomethanes (THM), DDT, CTC, and other impurities like, colour, odour, and bad taste are adsorbed. Water which is free from all suspended, dissolved chemical & microbiological impurities gets collected in the bottom container and is available for use.
