How Do You Replace The Starter In A Geo Tracker?
You discover that the engine in your Geo Tracker won’t start. According to the battery test, there are no problems there. You just replaced the alternator last year. Therefore, chances are your starter is the problem. While you could have a mechanic replace the starter for you, that can be rather expensive. Instead, follow the steps below to replace the starter in a 1989 to 1997 Geo Tracker yourself. Park your Geo Tracker on a level surface, activate the emergency brake and place blocks behind the back tires for safety. Disconnect the negative battery cable with a terminal puller. Raise the front end of the car with a jack for easier access to the starter. Label all wires connecting the starter to the solenoid terminals as you detach each one, so that you can remember where they connect later. Loosen the two mounting bolts with a wrench until you can do so by hand. Place one hand under the starter motor for support and then remove the mounting bolts with your other hand. Put the mounti
