How do I replace a wick in an old model Aladdin Lamp?
A replacement wick must be properly mounted in the wick carrier and fit into the burner. It is important that the center wick tube be clean and smooth. If you have an old lamp with a wick struck to the center tube it can often be lubricated with fresh kerosene to loosen. If the wick refuses to move it may be best to cut the wick and remove it to avoid damage to the gears in the burner. An old wick that has been dry and dirty will not work properly and should be replaced by a clean new wick. Aladdin wicks are currently available for models 9 through 24, plus A,B, and C. They are of good quality and function well. New, old-stock wicks may be bought from specialty lamp shops.
