How complicated is the installation?
Installing your Maxim outdoor furnace is easier than you might think. Many customers have chosen to install their own Maxim furnace because the installation can be easily completed in a day using the installation manual. Authorized Maxim dealers have the supplies and accessories you need for installation and maintenance. All of our dealers can provide you with information regarding your installation, and some dealers provide installation services.
Installing your Central Boiler outdoor furnace is easier than you might think. Many customers choose to install their own furnace because the installation can be easily completed using the installation manual. Authorized Central Boiler dealers have all the supplies and accessories you need for installation and maintenance. All of our dealers can provide you with information regarding your installation, and some dealers can even handle the entire installation for you.
Timber Ridge pre-plumbs and pre-wires all of the main components at the factory so that the remaining work mostly involves digging the ditch and installing the underground piping and electric wire from the furnace to the home. In a nutshell, you set the furnace in the desired location, dig the ditch from the furnace to the home, mount the water-to-air heat exchanger (duct coil) in the plenum of your existing furnace or duct work, mount the optional water-to-water heat exchanger and tempering valve on your hot water heater, run a 110 VAC wire to the furnace, install (and insulate) the flexible water piping from the furnace to the exchangers, and add an additional thermostat. In most cases, Timber Ridge delivers the furnace direct to your home and sets it on your pre-prepared site.
