Will the HP Photosmart Digital Camera upload a picture to PC?
• Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector. Figure 7: Connecting the USB cable to the camera and the computer • Make sure the camera HP Photo & Imaging software is installed in the computer. • Turn on the camera. The HP Image Unload software will launch on the computer. Depending on the setting, the images will automatically unload to the computer. • When the unload screen on the computer says Finished , the images have been saved and shared. • Disconnect the camera from the computer. • If communication fails, change the camera USB configuration from either Digital Camera to Disk Drive or from Disk Drive to Digital Camera. To change the settings: • Power the camera on and press the OK key. • With the down arrow button, go to Setup and select it by pressing OK . • In the next menu, select the USB configuration option.