Will any Firenock “G” series fit Easton A/C/C Pro Hunter arrows?
Firenock “E” style nock is what is needed to fit the A/C/C Pro Hunter arrow. A/C/C Pro Hunter all have an ID of ~0.227″and an OD of 0.270″, 0.275″, 0.280, and 0.285″ for 440, 390, 340 and 300 size respectively. With the factory uni-bushing installed, it is very easy to think that a Firenock “A” style will fit as the Easton “X” nock is about the same size. This is not the case, in order for Firenock to work properly, the Firenock unit must make no less than 3 full circumference contacts with the inside wall of the arrow shaft. The presence of a Uni-bushing makes it impossible for Firenock to work properly. The circuit will fly out from the nock when shot at any object; the entire unit will also not able to able spin balance inside the shaft. These are the only immediate issues that had been observed. Therefore in order to use Firenock in the A/C/C Pro Hunters, the uni-bushing must be removed. Since the uni-bushing used in the Pro-Hunter is glued in with very strong black glue, forcing i
