Why won’t my Bri-Mod RD1 dimmer switch module respond to the remote control?
Check batteries are not flat and are connected properly to the contacts in the casing. Make sure you point the remote control in the direction of the green “Bri-Luxe” logo on the module housing and that there is nothing in the way to block the signal. Move closer to the Bri-Mod RD1 dimmer switch module. 12) Q The lights seem to be less bright when on full brightness. If the lights are drawing too much current the Bri-Mod RD1 dimmer switch will attempt to handle this overload by reducing the brightness of the lamps. This can occur when certain types of bulb age. 13) Q The dimmer module keeps turning itself off. (a) The Bri-Mod RD1 dimmer switch may be doing this because it is grossly overloaded. Use lower wattage bulbs or dimmable electronic transformers to reduce the load. Otherwise use the Bri-Mod RD1 dimmer switch module elsewhere on a suitable load. (b) The Bri-Mod RD1 dimmer switch module will also turn off if you are trying to control an unsuitable inductive load (such as a wire-w
