Why Use InfloorBoard Over Other Hydronic Floor Heating Systems?
Traditional radiant floor heating systems in concrete work well, but they must first charge a large thermal mass before heat will begin radiating out of the panel. Many of these systems accelerate and decelerate slowly due to the large thermal mass, and they can be difficult to control. InfloorBoard, being thin but relatively dense and aided by its conductive aluminum layer, responds very rapidly. This results in greatly improved response time with almost no overheating since there is almost no thermal lag to overcome. InfloorBoard can be controlled with standard setback thermostats. The layer of aluminum on InfloorBoard and in the groove significantly enhances the transfer and evenness of heat distribution of the board. Aluminum is approximately 1000 times more conductive than wood. Acceleration is a measure of how fast a radiant heating system responds. The thin profile and relatively high density contributes to its superior acceleration and deceleration, providing heated floors quic
