Why Not Just Use Isopropyl Alcohol or Acetone?..
Put isopropyl alcohol or acetone on a thermal pad and 10 minutes later you will have…A thermal pad. Only with a lot of rubbing and scrubbing will you be able to remove the pad. While the alcohol or acetone may soften the pad, neither actually dissolves the pad. Introducing Arctic Silver 5 With its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability. Now available at Arctic Silver dealers worldwide, Arctic Silver 5 is definitely The New Reference. Details: Contains 99.9% pure silver Arctic Silver 5 contains over 88% thermally Conductive filler by weight. Arctic Silver 5 was formulated to conduct heat, not electricity. Thermal Impedance: 0.0045C-in2/Watt (0.001 inch layer) Average Particle Size: 0.49 microns (0.000020 inch) Thermal Conductance: 350,000W/m2 C (0.001 inch layer) Extended Temperature Limits: Peak: 50C to >180C Long-Term: 50C to 130C 3.5g Tube Performance: 3
Put isopropyl alcohol or acetone on a thermal pad and 10 minutes later you will have….Pad. Only with a lot of rubbing and scrubbing will you be able to remove the pad. While the alcohol or acetone may soften the pad, neither actually dissolves the pad. Although less visible, it is the same cleaning thermal greases with alcohol or acetone. ArctiClean 1 totally emulsifies thermal pads and thermal greases. The waxes, oils, and fillers of the thermal material are suspended within the ArctiClean 1 so they can be cleaned off completely. This emulsification allow ArctiClean to remove the thermal material in the microscopic imperfections in the heatsink or heat spreader that non-emulsifying cleaners cannot touch. The flash corrosion inhibitors in ArctiClean 2 then significantly reduce the corrosion layer on the copper or aluminum, improving the interface between the metal and the new thermal material and maximizing thermal transfer thus alowing lower temaptures as wel as mainatnce due to it’
