Why is the Device Serial Number field blank in inventory?
A. The field is blank because inventory could not obtain the information from the device. This is due to one of these reasons: •The serial number was not set in the device software when the device was introduced to the network. This should have been done using CLI, as described in the device configuration guide. •The device does not support MIBs for serial numbers. In either case you can set the serial number in the inventory database by selecting Admin > Essentials > Inventory > Change Device Attributes, and setting the field to the serial number printed on the device chassis.
A. The field is blank because inventory could not obtain the information from the device. This is due to one of these reasons: •The serial number was not set in the device software when the device was introduced to the network. This should have been done using CLI, as described in the device configuration guide. The device does not support MIBs for serial numbers. •In either case you can set the serial number in the inventory database by selecting Resource Manager Essentials > Administration > Inventory > Change Device Attributes, and setting the field to the serial number printed on the device chassis.
The field is blank because inventory could not obtain the information from the device. This is due to one of these reasons: •The serial number was not set in the device software when the device was introduced to the network. This should have been done using CLI, as described in the device configuration guide. •The device does not support MIBs for serial numbers. In either case you can set the serial number in the inventory database by selecting Resource Manager Essentials > Administration > Inventory > Change Device Attributes, and setting the field to the serial number printed on the device chassis.
A. The field is blank because inventory could not obtain the information from the device. This is due to one of these reasons: –The serial number was not set in the device software when the device was introduced to the network. This should have been done using CLI, as described in the device configuration guide. –The device does not support MIBs for serial numbers. In either case, you can set the serial number in the inventory database in this way: a. Select Resource Manager Essentials > Devices > Device Management > RME Devices > Edit Device Attributes. The Device Attributes Information dialog box appears. b. Select the device and enter the correct serial number printed on the device chassis, in the RME ID field and click Modify.
A. The field is blank because inventory could not obtain the information from the device. This is caused by one of these reasons: –The serial number was not set in the device software when the device was introduced to the network. This should have been done using CLI, as described in the device configuration guide. –The device does not support MIBs for serial numbers. In either case, you can set the serial number in the inventory database in this way: a. Select Resource Manager Essentials > Devices > Device Management > RME Devices > Edit Device Attributes. The Device Attributes Information dialog box appears. b. Select the device and enter the correct serial number printed on the device chassis, in the RME ID field and click Modify.
