Why don the measurement icons appear in QuickTeach when I start QuickTeach?
A system file may have been overwritten, possibly due to loading other software onto the system. Please contact Sheffield’s Technical Support for a procedure to fix this problem without needing to re-install the software. Q: Using MeasureMax V1.03, Error 429 “Unable to initialize agent” when trying to run a part program from the MeasureMax CMM Control Center. A: 1. If your part program starts with a number, this will cause the error 429. Open the program in QuickTeach, rename your part program starting with an alpha character (letter) and save the part program. 2. From the CMM Control Center, use File Maintenance; select this part program, and make an executable part program. 3. Now the part program should run without causing the above error. Hardware: Electrical Q: Axes will run in only one direction. A: Move the motor drive pulleys by hand. If there is only resistance in one direction, replace servo amplifier. If resistance from the motor is met in both directions, insure that the Ze
