Why does HP OpenView NNM SE run so slowly, both on discovery and mapping?
Verify the IP configuration and DNS configuration on your management station using the procedure that follows. If any of these steps fails, then you may have a network configuration problem. For example, the configured IP address for the DNS may be incorrect. When one of the steps fails, you can stop at that point and fix the network configuration or you can perform the remaining steps for additional information. The output will be specific to your network environment and should look like the following example. From an MS-DOS® command prompt, perform the following steps: • Run the ipconfig utility. Verify that the information displayed for your system is correct as follows: C:\WINNT>ipconfig Windows NT IP Configuration Ethernet adapter E100B1: IP Address. . . . . . . . . : 200.166.3.116 Subnet Mask . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . : 200.166.3.1 • Run the nslookup utility on the IP Address value from step 1. Verify that the information displayed for your syste
