Why do I not hear any dial tone even after pressing the ATA 186 function button?
A. ATA 186 will not give dial tone for the following reasons: • The attached telephone and/or its cable is faulty or they are not connected properly. • The ATA 186 ports/lines with telephones attached have no assigned UIDs (telephone numbers). You can assign UIDs via the web browser or by using the voice IVR menu. Most likely port 0 will be used since the IVR menu functionality is available to line 0 only. Press 3 for port 0 and press 13 for port 1. • The ATA 186 is in the process of getting an IP address through DHCP. DHCP is enabled by default after version 2.11. If static IP address configuration is needed, disable DHCP . For the cases where DHCP is required, please make a sanity check on the DHCP server and the connectivity in between. • The ATA 186 is trying to register with a gatekeeper, the IP address of which is specified in the GKORPROXY parameter. Please check the IP address of the gatekeeper, please make a sanity check with the Gatekeeper and the IP connectivity in between.
Related Questions
- Click on the Dial pad window and click on the Clear button from the USB phone. 15) Why can I not hear anyone during an audio conference?
- What should I do if my handset displays "Check tel line" and I can hear a dial tone?
- Why do I not hear any dial tone even after pressing the ATA 186 function button?
