Why Can MicroBase Connect To My MicroVib II Aircraft Analyzer?
• Make sure you are using the correct procedure to connect to your PC. With the MicroVib II turned on and with the mode menu selected, start the MicroVib II Data Manager Dialog (File – MicroVib II – Data Manager). MicroBase should automatically connect and report that it has found your MicroVib II. • Make sure you are using the correct cable to connect your MicroVib II your PC. You should use the 1311 Serial Cable to connect directly from your MicroVib II to your PC. • Make sure you have selected the correct serial port in MicroBase (Options – Ports). • Make sure that the serial port you wish to use is enabled. On some computers, the serial port may be inactivated due to a setting in the computer cmos or in the Windows device manager. • Try to determine if another program is preventing access to the Serial Port even though it is not actively using it. This is a common problem with computers using Hotsync software intended to connect to a PDA. If this is the case, close the interfering
