Why Can MicroBase Connect To My MicroVib Aircraft Analyzer?
• Make sure you are using the correct procedure to connect to your PC. With the MicroVib turned off, select the MicroVib Unload Dialog (File – MicroVib – Unload), then turn on the MicroVib and your data will be automatically unloaded. • Make sure you are using the correct cable to connect your MicroVib to your PC. You will need to use the 1025 I/O Cable and the 1026 RS-232 Adapter. • Make sure you have selected the correct serial port in MicroBase (Options – Ports). • Make sure that the serial port you wish to use is enabled. On some computers, the serial port may be inactivated due to a setting in the computer cmos or in the Windows device manager. • Try to determine if another program is preventing access to the Serial Port even though it is not actively using it. This is a common problem with computers using Hotsync software intended to connect to a PDA. If this is the case, close the interfering program so that MicroBase can have access to the Serial Port. • If using an older versi
