Why cant I get the AirLink to connect to my TV?
In order to use the AirLink you must connect it to a matching RCA connector on your TV or VCR. All VCRs (not players only) have at least one set of video input connectors on the rear (newer units may have one set on the front). This is to allow for recording from an external camera. Most newer TVs have these same RCA connectors for direct video input. You will need to connect your AirLink receiver cable to these audio and video inputs on your TV or VCR. If your TV does not have an RCA connector for direct video (composite) input you will not be able to use your AirLink in its current configuration. You will have two choices at this point. You can use your VCR if you have one or purchase an RF Modulator. The RF Modulator changes the composite video signal to an RF signal. The RF Modulator attaches to the TV using the F connector the screw on coax connector where your antenna or cable-box cable attaches. You can purchase an RF Modulator from Radio Shack for about $30. You cannot use a si
