Why cant I get rock chips and cracks to fill properly when I am working in the sunshine?
If you are not using a ultraviolet shield the resin is probably curing prematurely and therefore blocks the path of the resin. It is very important that you block the suns UV rays until you are ready to cure the repair. Problem: Injector plunger is stuck in the upright position or stuck in the injector barrel. Solution: Thoroughly clean the injector after every repair by blowing off the outside and blowing out the inside with compressed air or rinsing both parts in denatured alcohol. Store parts separately. Store the plunger in the down position so the spring is fully extended. Never turn the bridge or injector upside down when it has resin in it. If this happens unintentionally, clean with denatured alcohol immediately.
