Why can I establish a connection to the Squirrel from Darca?
There are a number of reasons that this problem could occur: • The Squirrel does not have a power source (either batteries in the Squirrel s battery compartment or an external mains power supply (MP12U). • The Squirrel is not asleep. To correct this, select OUTPUT mode and wait 3 seconds for the Squirrel s display to go blank. • You are trying to connect to a networking Squirrel but have not selected the Networked Squirrel option in the Settings|Communications dialog. If you are using a Modem connection: • The Modem is not connected to your PC. • The Modem is not connected to your phone line. • The Squirrel is not connected to the remote modem by an LC69 cable. • Your Modem is not installed in Windows properly. Check the Modems section of Control Panel. • The remote Modem has not been configured correctly. If you are using a Direct connection: • The Squirrel is not connected to your PC by an LC68 cable. • The LC68 cable is plugged into the wrong COM port check your settings in the Sett
