Why are there audio glitches or dropouts?
• A clocking conflict (two clocks on the T1 line). The studio Moseley should be the master Clock for the system; verify that the T1 line has no external clock connected. Use a local loopback test (see B below) to verify stable operation within the Moseley SL9003T1. • Too much cable (more than 100 feet) between the T1 line and the Moseley SL9003T1; contact the Moseley factory for advice. • Storms in the area can affect T1 lines, even if all the equipment is working normally. Use a local loopback test (see 2 below) to verify stable operation within the Moseley SL9003T1. If operation via the T1 line comes back to normal after the storm leaves the area, the problem was probably in the T1 line.
