Which is the documentation needed to design DYKA Vacurain system?
• dimensions of the building, roof surface – position of valleys and ridgelines, surface belonging to the valley = roof construction drawing • height of the building (height of the roof parts) • required location for the downpipes, location of the outside drainage connections • position of the horizontal pipe (in the holes of concrete beams etc.) = section drawing • location of other installations (coordination with sprinklers, air conditioner …) • roofing material (plastic foil, bitumen, steel) • other useful information: firewalls, office rooms location..) When some information is missing (for example the position of the downpipes), the system can be then recalculated, but this might change the pipes’ diameters and finally the price. DYKA provides the service, prepares the design and makes relevant calculations. DYKA also provides the technical supervising of the installation, so that you can be sure the VACURAIN system will work properly. DYKA software used for calculating the VACUR
