Where to get saddlebag brackets for a Hyosung Aquilla GV250?
I was looking at a picture of this bike and it looks like you could do something similar to what I have done with my Honda. You can make your own quite easily. The rear fender rails appear to have 2 bolts holding them on. You can use these to mount the brackets. All the brackets are meant to do is hold the bags away from the rear tire. I used 4 flat pieces of metal approximately 1/8 inch thick and 8-9 inches long (2 on each side of the bike) with 1 hole in the end. Put the bolt from the fender rail thru the hole and you can now rotate each bar as needed to support the bag. This method is based on using soft sided throw over style bags. The stock bolts in the fender rails my not be long enough now with the added thickness of the flat metal plate, if they are not them just replace them with longer ones.
