Where is the Night Mode setting on the RX-V1800?
With the RX-V1800 there is not a Night mode button on the remote control and in order to make adjustments for night listening the receiver must be setup in the Adaptive DRC (Adaptive Dynamic Range Control) settings. To set the Adaptive DRC on the RX-V1800 to operate, follow the instructions below. Please note: In order to make these adjustments you will need to have a TV/Monitor connected to one of the RX-V1800monitor outputs. 1. Press the [POWER] button on the RX-V1800 remote control if unit is not already powered on. 2. Set the remote control to [AMP] using the [SIDE SELECTOR] switch located to the right of the [VOLUME CONTROL] buttons on RX-V1800 remote control. 3. Press the [MENU] (Set Menu) Button on the RX-V1800 remote control, the On Screen the display should be displaying on the TV/Monitor. 4. Use the [UP/DOWN] arrow buttons on the RX-V1800 remote control to move the Arrow to Manual Setup. 5. Press the [ENTER] button on the RX-V1800 remote control. 6. Use the [UP/DOWN] arrow bu
