WHERE DO I INSTALL THE HydroSana CONDITIONER?
HydroSana is best fitted into the main line after the water meter or pump and before any tee junctions or holding tanks. This allows the whole system to benefit. HydroSana will operate at any angle, above or below the ground. When fitted below ground it must be installed in a suitable size box or pit, which allows access to the battery pak and unions for cleaning. On larger installations where it is impractical to install a HydroSana Conditioner after the water meter, several smaller HydroSana Conditioners may be fitted on branch lines within the property. Important: When watering or irrigating from a short discharge pipe it is extremely important to prevent air from entering the conditioner. The short pipe can cause cavitation which will result in an oxide forming on the catalyst core, impairing performance. If cavitation occurs, reduce the outlet slightly to obtain a full pipe of water and so eliminate this problem. NOTE: Do not install or test the conditioner at the tail end of a pi
