Where can a GeoSpring hybrid electric heat pump water heater be installed?
The GeoSpring water heater should be installed in a clean, dry area as near as practical to the area of greatest hot water demand to prevent long un-insulated hot water lines from wasting energy and water. Because the units draws in air from the room to heat water, the room must be at least 10′ x 10′ x 7′ (700 cubic feet) or larger. If the room is smaller than 700 cubic feet, the room must have a louvered door or a door which has vents installed near the top and bottom of the door. Each of these vents should have an area of 240 square inches.
