When using Yoggie, how do I access my other computers / Network Printer through my local private home network?
To allow internal network between the local computers, perform the following steps to open the needed ports: Open Yoggie’s Console Management (https://yoggie.yoggie.com:8443/) and verify that the Security Policy (Settings Section) is not set on High, (For more information, click here ). The next step is to add the needed port to the Firewall settings: From the Settings Section and the Security tab, click on Advanced > Firewall: Gatekeeper Pico series / Card : In the firewall menu, click the “+” button and add the appropriate rule with the require ports for NetBIOS (135 – 139 TCP & UDP). You will need to add the same rule twice – one for inbound and one for outbound traffic (same settings but different directions). Gatekeeper SOHO / Pro: In the firewall menu, click the “+” button and add the appropriate rule with the require ports for NetBIOS (135 – 139 TCP & UDP) outbound traffic. Then, for inbound rule, use the port forwarding link to set the same rule (don’t forget to enable the port
