When printing tags using the Zebra LP2824, tags are printed erratically, skipped, printed upside down, or not properly centered on tag stock. How can I fix this?
This typically happens when you have been using one type of tag stock, and then switch to another. Select the Calibrate button on the Select Tag dialog to calibrate the tag printer. Several labels will be fed through the printer during this operation. When calibration is complete, you can roll the labels back into the printer to avoid waste. If printing jewelry tags with flaps and calibration does not solve the problem, select the checkbox labeled Flap offset for jewelry tags on the Select Tag dialog. This setting tells Point of Sale to use extra parameters, required by some revisions of the Zebra printer, when printing jewelry tags with flaps.
Related Questions
- The Zebra LP2824 prints one tag, advances past several blank tags, and then the printer light becomes red, or the printer light becomes red when sending a job to the printer. How can I correct this?
- An email .doc attachment printed with no spaces in between any of the words. How do I get better printing?
- Tags are skipped when printing on a Zebra LP2824, even after a calibration. What could be the problem?
