When on the Setup screen I cannot change the communications port or select TCP/IP as the communications device. What is wrong?
The EM615-G software will not let you select a device which does not exist or use a device driver unless it is currently loaded on your system. If trying to select a different serial port, verify that the port is enabled in your computer s setup and the serial port is set to a standard address (i.e.: COM1, COM2). If trying to select TCP/IP for a network connection, verify that your TCP/IP kernel (Sockets) is loaded. From a DOS prompt, run your network version of PING and make sure a host can respond to your system. If trying to use TCP/IP, make certain the EM615-G software you are using is configured for your network type. When the EM615-G Welcome screen is displayed, the top box with the software credits will display WOL for Wollongong; NOV for Novel LWP; FTP for FTP s kernel and; LM for Microsoft s LAN Manager using Sockets.
Related Questions
- When on the Setup screen I cannot change the communications port or select TCP/IP as the communications device. What is wrong?
- I select the COM Port but the Communications Options screen just keeps popping up when I select the OK button. What is wrong?
- How to setup a Standard TCP/IP Port to print to Print Server?
