When is the scheduled maintenance of my Westerbeke diesel engine and what should I do?
Daily (Before Use) Check • Oil sump level • Coolant level • Fuel supply • Primary fuel filter/water separator • Panel gauges operation (indicating lights, alarms) • Transmission fluid level • Loose belts, clamps, fittings, wires Monthly • Check zinc anode in heat exchanger After 50 Hours Initial Operation • Change engine lube oil & filter • Replace fuel filter elements • Torque cylinder head bolts ** • Adjust valve clearances ** • Adjust drive belts • Check electrical connections • Lubricate control cables • Change transmission fluid • Check idle speed ** After Every 100 Hours • Change engine lube oil & filter • Adjust drive belts After Every 250 Hours • Replace engine fuel filter(s) • Check siphon break operation (if installed) After Every 500 Hours • Torque cylinder head bolts ** • Adjust valve clearances ** • Drain, flush, refill fresh water coolant • Check starter motor drive, lubricate pinion ** • Check glow plugs • Check water injected exhaust elbow condition ** • Check raw water
