When Devices are shown on the wrong floor, what is the interfloor debug checklist/procedure?
A. The floor determination is carried out based on the RSSIs received by APs on different floors. So if APs are incorrectly placed on floors this can lead to interfloor. Also, verify the current location of the device under consideration; make sure it has not moved to a different floors by another user. Is the deployment correct?—Incorrectly placed APs on the WCS maps can cause interfloor and in general lead to poor location accuracy. Check if the APs physical location is consistent with the APs position marked on WCS maps. Does the deployment comply with the deployment guidelines?—Inconsistency in these deployment guidelines between floors can also lead to interfloor problems. Refer to the user guide on deployment guidelines. Does the problem only occur in some area or everywhere?—Due to building structure and RF characteristics, APs on adjacent floors can hear a device more strongly than the APs on the current floor. From software release 5.2, new algorithms were added to mitigate ag
