Whats the best way to use GP66 on heavy duty cleaning?
In cleaning forklifts, conveyors, hydraulic machinery, engines, earth-moving equipment, farm equipment, large greasy food areas, shower and locker areas, whitewalls and the like; use GP66 full strength and spray it on with a low-pressure garden type spray tank. Let it sit for as long as needed…in most cases 15-20 minutes is plenty…if the GP66 dries out, spray it again lightly and rinse immediately with plain cold water through a small hi-pressure washer putting out about 500 PSI at the nozzle or more. The secret in the use of GP66 is to make sure it hasn’t dried; if it did, be sure to lightly spray it again before rinsing. Spray GP66 from the bottom to the top…rinse and clean with a hi-pressure washer from bottom to top as well…don’t forget this important rule of BOTTOM to TOP!
