Whats the best way to remove the old sticker and stamp?
If the sticker that came on the motor is not already an oily mess, is peeling or falling off then its a matter of time. You can remove the sticker anyway you choose. For sticker removal we choose to use simple WD-40 and a razor blade. Saturate the sticker with WD-40 and let stand for 3-5 minutes. From our experience this is the most safe and easiest method of removal. Then use a simple razor blade and start at an edge and carefully scrape away the sticker, take your time! When finished there may be some residual glue there so continue spraying the WD-40 on and try wiping away. The razor blade may be needed to help remove the last of the glue.Be careful not to get any WD-40 or any other fluid under the magneto cover!. For removal of the stamp, simply take the “clutch arm cover” off by removing the 3 screws and tapping out the rivets from behind with a nail. This is very easy as the rivets come right out. Then replace the “clutch cover arm” then you are ready for the next step.See Instru
