What was the command to do the velocity change resulting in freeze frame?
To create a freeze frame, right-click the event and choose Insert/Remove Envelope | Velocity from the menu. Place your project cursor at the frame you want to freeze. Right-click the velocity envelope at that same frame and choose Add Point from the menu. Add another point a bit later on the envelope. Position the second point directly under the first point. Leave the first point set to normal velocity (100%). Right-click the second point and choose Set from the menu to select the points current velocity value. With the value now selected, type 0 into the velocity value field and press Enter. You now have a freeze frame. For more information about velocity envelopes, check out this article from our newsletter archives: http://www.sonycreativesoftware.com/news/article.asp?articleid=53.
