What tools do I need to install the Rosco SubFloor w/standard perimeters?
If you are installing the Rosco SubFloor using standard perimeters and corners the only tools you will need are a tape measure and a cordless screw gun, SET TO ITS LOWEST TORQUE SETTING! Don’t use a corded drill unless it has a low-torque setting, as it is too easy to over-tighten and strip the threads of the machine screws. Over-tightening the machine screws that hold the perimeters together may cause the screws to become stripped, making the floor much harder to take apart later or to re-install.
