What test equipment have others used with PrintCapture?
The equipment list table lists some of the test equipment that others have used with PrintCapture. If you have used something not listed we would like to hear from you. We would also like to hear from you if you have used one of the models listed with a different print mode or if you have additional information that you would like to share. Please send your information to . Note of Interest: The use of PrintCapture has grown far beyond the initial target of oscilloscopes, logic analyzers, and spectrum analyzers. Customers are now using PrintCapture with many devices that we didn’t envision or even know about. The equipment list table has gotten too large and has been moved to its own page. Click on equipment list to see the list.
The table below lists some of the test equipment that others have used with PrintCapture. If you have used something not listed below we would like to hear from you. We would also like to hear from you if you have used one of the models listed below with a different print mode or if you have additional information that you would like to share. Please send your information to support@printcapture.com. When looking at the following list of test equipment you will notice that we used the term Hewlett-Packard instead of Agilent. The names are essentially interchangeable. If we mention a Hewlett-Packard 54616C it (probably) also applies to an Agilent 54616C. PrintCapture 3.x added an I/O interface for National Instruments GPIB interfaces that use National Instruments’ NI-488.2 device driver. NI’s NI-488.2 device driver and GPIB interface must already be installed and working on your computer before it can be used by PrintCapture.
