What surfaces require deleading?
To achieve compliance with the Massachusetts Lead Law removal of lead paint violations must be accomplished within a dwelling unit, the unit s interior and exterior common areas, and the exteriors of all other structures within the same lot line. On accessible surfaces, removing loose paint and re-painting with non-leaded paint does not constitute compliance with the Massachusetts Lead Law. • Intact lead paint on mouthable surfaces must be removed completely at least five feet from the floor, steps, or ground and four inches back from each mouthable edge. Alternatively the surfaces can be covered, replaced or encapsulated. Flat casings can be reversed, the remaining exposed sides must have the lead paint completely removed.
To achieve compliance with the Massachusetts Lead Law removal of lead paint violations must be accomplished within a dwelling unit, the unit s interior and exterior common areas, and the exteriors of all other structures within the same lot line. On accessible surfaces, removing loose paint and re-painting with non-leaded paint does not constitute compliance with the Massachusetts Lead Law. • Intact lead paint on mouthable surfaces must be removed completely at least five feet from the floor, steps, or ground and four inches back from each mouthable edge. Alternatively the surfaces can be covered, replaced or encapsulated. Flat casings can be reversed, the remaining exposed sides must have the lead paint completely removed. Mouthable surfaces include, but are not limited to, window sills, door fames below the five foot level, stationary window sash including mullions, stair rails, porch railings, and all other interior and exterior surfaces or fixtures that may be readily mouthed by ch
