Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What slots are needed in a PC for the Panasonic RealTime Express (RTEX) Ethernet-based interface system?

April 26, 2017ethernet-based Express interface needed Panasonic pc realtime rtex slots system

0

Posted

What slots are needed in a PC for the Panasonic RealTime Express (RTEX) Ethernet-based interface system?

1 Answer

0

Posted

There must be a PCI slot for the FPA-200 PCI RTEX adapter board. No other slot is required; both the RTEX Ethernet-based servo network and the optional VersioBus II fiber-optic I/O network connect to this single PCI adapter board.TOP Q: What slots are needed in a PC for the CANopen interface system? A: There must be a PCI slot for the CAN PCI adapter card.TOP Q: What slots or connectors are needed in a PC for the VersioBus II interface system? A: One ISA slot, one PCI slot or one PC104 stacking connector there are VersioBus II adapter boards for ISA, PCI and PC104.TOP Q: What slots are needed in a PC for the MECHATROLINK interface system? A: For the MECHATROLINK II system, you need one ISA slot, one PCI slot or one PC104 stacking connector there are MECHATROLINK II adapter boards for ISA, PCI and PC104. For the MECHATROLINK III interface system, you need a PCI slot. If you are including optional VersioBus I/O in a MECHATROLINK II or MECHATROLINK III system, there must be a dedicated IS