What should I use to fill holes, chips & cracks before applying SkimStone?
Some people prefer leaving small cracks and incorporating them into the overall design. However, if you’re not one of those people, you can use the SkimStone to fill small imperfections in the floor by mixing it to a consistency of patching compound. Use a putty knife to fill the holes or cracks and allow to dry for 24 hours before applying the first coat of SkimStone. Note: Do not fill in expansion joints with SkimStone. We recommend taping off expansion joints with painter’s tape while applying the SkimStone. Then remove the tape and touch up the joints by brushing on SkimStone to achieve the proper color before applying the Protective Sealer.
