What should I do when my printhead nozzles are blocked with dried ink?
Place the clogged nozzles in warm water and soak them until the dried ink begins to flow from the nozzle. After a few minutes of letting the dried ink flow, remove the nozzle from the water and gently dry it with a soft tissue or cotton swab. Reinstall the cartridge and run the print head cleaning mechanism (described in your inkjet printer’s manual). If this does not work, repeat the procedure. If your cartridge still does not print after repeating, you will need to purchase a new cartridge because the print head is probably damaged. 15. What can I do if my printer does not print after refilling my cartridge? Using the syringe supplied in your refill kit, inject air into the top air vent to clean the nozzles. A small amount of ink should be emitted from the nozzle upon injection. If this procedure does not work, your printhead nozzles are probably blocked with dried ink. At this point using the syringe: Take out as much ink as possible from your cartridge. Then place the clogged nozzl
