What resin can i use with fiber glass ?
epoxy resin for reusable moulds you do know how to tapir the surfaces and join the component parts I presume? 1.In order to have a form from which to develop your mould, you must either build the article from scratch using wood, plaster, polyester putty, Formica, sheet metal, etc. or you must have on hand a completed article which you wish to duplicate. The latter is of course the fastest method. The plug is generally a male model exactly like the item you wish to fabricate in every detail. If the plug does not have draft (taper) then you will have difficulty getting parts off. If the plug has reverse bends, like many canoes, then you will need to make a split mould which can be spread or taken apart. If the plug contains soft materials on its surface such as plaster, wood, or putty, then it will have to be sealed with lacquer or resin to fill the pores. If plaster is used, it must be oven dried and then sealed. To prevent your mould from sticking to the plug, the plug must be coated w
