Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What printers (laser or otherwise) may be used with NEXTSTEP?

April 26, 2017laser NextStep printers Used

0

Posted

What printers (laser or otherwise) may be used with NEXTSTEP?

1 Answer

0

Posted

printer, NeXT Adding supported postscript printers is rather simple: * Get a serial cable (e.g., Macintosh to LaserWriter Plus), but check whether that works with your printer * Configure using Print Manager * Configure printer communication according to manufacturer’s recommendations. (9600 baud software flow control). A sample printcap entry needs to be loaded into the netinfo database. You can use either niload printcap . , or use NetInfoManager to change the br and lp properties of your LaserJet. Using the default baud rate and /dev/ttya will also work, for most print jobs (if the printer is connected to this port). LaserJet_III: \ :note=LaserJet_III:ty=HP LaserJet III PostScript: \ :sd=/usr/spool/NeXT/LaserJet_III:lp=/dev/ttyfa: \ :lf=/usr/adm/lpd-errs:af=/usr/adm/lp.acct:br=19200:rw:fc\#0000374: \ :fs\#0000003:xc\#0:xs\#0040040:mx\#0:sf:sb:if=/usr/lib/transcript/psif: \ :of=/usr/lib/transcript/psof:gf=/usr/lib/transcript/psgf: \ :nf=/usr/lib/transcript/psnf:tf=/usr/lib/transcript