What power does the controller source from the outputs?
The Millenium II outputs do NOT ‘source’ any voltage. You have 2 options for outputs 1) Relay outputs: 10 amps @ 250 VAC (uL) 8 amps 250 VAC (CE) On all M2’s you have 1 relay with a common, normally open, and normally closed terminal. All other relay outputs are normally open(common and normally open terminal). All relays are dry contact. These relays are similar to a standard light switch. You have to wire power to the relay. When the relay closes it transfers the power on the common terminal to its normally open terminal. Relay outputs can switch both AC and DC voltages. 2) Transistor Outputs: PNP Open emitter output 700ma @ 28 VDC Transistor outputs can only switch DC voltages. Transistor outputs should be used where high cycle rates are needed. If your load pulls more than 700ma, or requires AC voltage, the M2 can turn on a Crouzet Solid State Relay (SSR), which will turn on your load. Crouzet SSR’s are available with current ratings up to 150 amps. With transistor outputs, like re
