What ports need to be opened on my corporate firewall in order to access the Vulkano at home?
Both VULKANO and Client sides should be able to send and receive from remote UDP 56123, TCP 56123 & TCP 49177 ports – if this is needed for firewall configuration; with the exact destination addresses. If this is impossible due to corporative firewall policy, there is no way to connect VULKANO remotely, as all the connectivity is being achieved via the P2P servers on these ports. If you have a firewall on client or VULKANO sides, the firewall should open UDP activity on both directions to and from remote and local for the above mentioned ports. Kindly note regarding these ports: If Vulkano or Client stays behind a NAT, these ports should be mapped on the NAT, otherwise firewall doesn’t allow traffic on required ports even if they are opened (if it sees external port as another than these ports). Conclusion If a client is behind NAT and firewall, then the complete client configuration needed is: firewall to open UDP 56123, TCP 56123 & TCP 49177 ports for incoming and outgoing traffic, N
