What other problems can arise during the corona treating process?/How can they be addressed?
Inadequate exhaust ductwork design. A faulty exhaust system design has the tendency to provide far more static pressure on the exhaust fan than desired. The result of this is reduced air volume exhausted from the treater station itself. This in turn does not trap and capture as much of the ozone generated in the corona treating process as needed, but merely allows it to escape out and around the station itself; thus not removing it from the workplace. Also, assure that the final exhaust point of the ozone is exhausted at least 10’ above any roofline and is not exhausted near any fresh air or make-up air units.
