What mechanism do configuration jobs use to initiate a configuration upload?
A. WLSE configuration jobs use Telnet/SSH or TFTP/SCP: –Telnet/SSH is used when merging the selected configuration to the running configuration, or when copying the running configuration to the startup configuration. –SCP/TFTP is sued when the selected configuration template will replace the startup-config on the selected device(s), or when the device(s) will be rebooted after the copy to startup-config succeeds.
A. WLSE configuration jobs for IOS devices use Telnet or SSH. Configuration jobs for non-IOS devices can use either HTTP or SNMP as the mechanism to initiate a configuration template upload to an access point. •The HTTP mechanism is valid for all supported device versions. The following setup parameters must be in place for HTTP mechanism to function properly: –HTTP credentials for the device (with admin and firmware privileges on the access point) must match those entered on the WLSE HTTP device credentials screen. –TFTP server settings on the access point (Setup > FTP), must refer to the WLSE’s IP address.
