Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What kind of maintenance needs to be done to the 5th Wheel Hitch?

hitch maintenance Needs wheel
0
Posted

What kind of maintenance needs to be done to the 5th Wheel Hitch?

0

• Lubricate skid plate surface of the hitch with automotive type chassis grease or use a plastic lube plate to provide a lubricated surface. Use white lithium spray lube or engine oil to lubricate pivot points of moving parts within the hitch. • Plastic lube plates can be used to avoid messy grease. The plastic lube plate must not exceed 3/16 of an inch in thickness to ensure hitch will operate properly. Lube plates must be 10 inches in diameter or larger to properly distribute king pin weight. • Before each trip or maneuver, operate the handle and check that the jaws open and close freely. • See that all hitch pull pins are in place and the spring retaining pins are installed. • Recheck tightness of all hardware every 1000 miles of use. • Lubrication to the hitch is essential to provide for a good long service life. Any pivoting point inside the head should be lubricated with a white lithium spray lube. The pivoting points outside the head need to be lubricated with a high pressure lu

0

• Lubricate skid plate surface of the hitch with automotive type chassis grease or use a plastic lube plate to provide a lubricated surface. Use white lithium spray lube or engine oil to lubricate pivot points of moving parts within the hitch. • Plastic lube plates (Reese No. 74295) can be used to avoid messy grease. The plastic lube plate must not exceed 3/16 of an inch in thickness to ensure hitch will operate properly. Lube plates must be 10 inches in diameter or larger to properly distribute king pin weight. • Before each trip or maneuver, operate the handle and check that the jaws open and close freely. • See that all hitch pull pins are in place and the spring retaining pins are installed. • Recheck tightness of all hardware every 1000 miles of use. • Lubrication to the hitch is essential to provide for a good long service life. Any pivoting point inside the head should be lubricated with a white lithium spray lube. The pivoting points outside the head need to be lubricated with

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.

Experts123