What is the torque spec for pressure plate bolts?
5/16 and 8mm bolt should be torqued to 25ft/lbs in a star like pattern. It is best to start out with 15ft/lbs and work your way up, this way the pressure plate remains flat. Top • What is a dual friction clutch? A dual friction clutch is when two different friction material facings are applied to each side of the clutch disk. For added performance and service life, Kevlar is added to the pressure plate side of the clutch disk and the other side remains organic. For street and strip, a dual friction disk is often a combo of Kevlar and metal. This allows the clutch to operate as smoothly as it can with more bite off the line. Contact us if you have detail questions on other combinations and applications. Top • Should I resurface the flywheel before installing a new clutch? Yes. This should be done by a blanchard grinder and not on a lathe. The grinder keeps the flywheel cool while resurfacing and put back in the machine marks that are need to help break in quicker while imbedding fresh c
Related Questions
- Lastly, but related, I had to pull the pressure plate off to make sure the flywheel bolts were tight, and I can find torque specs for either the flywheel or pressure plate bolts. Any ideas here?
- What is the torque spec for a clutch pressure plate on a 1997 ford ranger?
- What is the torque spec for pressure plate bolts?
