What is the temperature range that cured foam can withstand?
A. Cured two-component foam withstands temperatures between -200 degrees F (-128 degrees C) and +200 degrees F (+93 degrees C). Please refer to the Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS) for formulation specific information and physical properties. Q. If I spray a two-component kit, and the foam does not cure, is soft and spongy, or is crispy to the touch, what went wrong? A. The kit is probably off-ratio. The components are designed to dispense 1:1 in volume. Make sure the kit has been thoroughly shaken before use, and that each tank valve is fully open. Change the gun nozzle and resume spraying. Proper chemical temperature is also required for optimum dispensing (see above). Q. Can Handi-Foam(R) products be reused? A. Yes. Instructions are listed below: Two-component foam – Leave dispensing gun attached to cylinders and under constant pressure. Always eject the gun nozzle. Cylinder valves should be turned off; however, do not drain hoses. Fresh chemical shou
A. Cured One-Component foam typically withstands temperatures from -200 degrees F (-129 degrees C) to +200 degrees F (93 degrees C). Cured Two-Component foam withstands temperatures between -200 degrees F (-128 degrees C) and +240 degrees F (116 degrees C). Please refer to the Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS) for formulation specific information and physical properties.
