What is the significance of the lights on the power supply?
The significance of the lights is to show you firstly that the power is on – the first green light is only a “power on” indicator, then as the lights increase it is showing you how much power the unit is supplying to the array in the bath. The more lights, the more power. As a rule 2-5 lights up is the optimal power, any more than that and you are drawing more power which will put more strain on the unit itself. Also, the metallic plates of the unit will wear out faster if more than five green lights are on. If all the lghts come on and start flashing it means your unit is drawing maximum power and will shut itself down. If your unit displays over five green lights, then you should use the power attenuater with the unit.
The significance of the lights is to show you firstly that the power is on on the model 3100 and 2500- the first green light is only a “power on” indicator, then as the lights increase it is showing you how conductive the water is, the higher the conductivity the more lights are illuminated. As a rule of thumb 3-5 lights is the optimal level. Also, the positive rings and track of the Orb generally will wear out faster the more lights are on. If all the lights come on and the internal buzzer is sounding it means your unit is drawing maximum power. Move the power selector switch to a lower setting, if this does not lower the power output contact Q The Experience for assistance.
